MEDUSA 511

Large volume portable dry block, liquid bath, Blackbody source & Fixed Point system, 50°C to 700°C

Medusa 511 calibrates temperature probes from 50°C to 700°C, in three zone control of the substantially large calibration volume, 45 mm diameter by 285 mm deep. It can be used as a dry block, a liquid bath, as a blackbody source and as an ITS-90 Fixed Point system with calibration uncertainties as small as 0.001°C.

MEDUSA 510

Large volume portable dry block, liquid bath, Blackbody source & Fixed Point system, 30°C to 550°C

Medusa 510 calibrates temperature probes from 30°C to 550°C, in three zone control of the substantially large calibration volume, 45 mm diameter by 285 mm deep. It can be used as a dry block, a liquid bath, as a blackbody source and as an ITS-90 fixed point system with calibration uncertainties as small as 0.001°C.

GEMINI 700 LRI

High capacity portable calibration dry block, 50°C to 700°C – Removable block

Gemini 700 LRI is a portable calibration dry block for temperature thermometers from 50°C to 700°C. It has a high capacity to allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volume of 65 x 160 mm.

GEMINI 700

High capacity portable calibration dry block, 50°C to 700°C

Gemini 700 is a portable calibration dry block for temperature thermometers from 50°C to 700°C. It has a high capacity to allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volume of 65 x 160 mm.

GEMINI 550 LRI

High capacity portable calibration dry block, 35°C to 550°C – Removable block

Gemini 550 LRI is a portable calibration dry block for temperature thermometers from 35°C to 550°C. It has a high capacity to allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volume of 65 x 160 mm.

GEMINI 550

High capacity portable calibration dry block, 35°C to 550°C – Fixed block

Gemini 550 is a portable calibration dry block for temperature thermometers from 35°C to 550°C. It has a high capacity to allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volume of 65 x 160 mm.

FAST-CAL MEDIUM

Basic fast industrial calibration dry block, 30°C to 350°C – Removable insert

Fast-Cal Medium is a basic fast industrial calibration dry block for temperature thermometers from 30°C to 350°C.

FAST-CAL LOW

Basic fast industrial calibration dry block, -35°C (Tamb 20°C) to 140°C – Removable insert

Fast-Cal Low is a basic fast industrial calibration dry block for temperature thermometers from -35°C (Tamb 20°C) to 140°C.

FAST-CAL HTM 2010

Basic fast industrial calibration dry block, -35°C (Tamb 20°C) to 140°C – Fixed block

Fast-Cal HTM 2010 is a basic fast industrial calibration dry block for temperature thermometers from -35°C (Tamb 20°C) to 140°C. With its fixed block, this model is ideal for the validation of washer disinfectors, steam sterilizers and autoclaves.

FAST-CAL HIGH

Basic fast industrial calibration dry block, 30°C to 350°C – Removable insert

Fast-Cal Medium is a basic fast industrial calibration dry block for temperature thermometers from 35°C to 650°C.

944

True surface temperature measurement system, 30°C to 350°C

The 944 system allows true surface temperature of surface sensors to be measured by controlling and adjusting the temperature along the sensor.

983

Small hot plate, 35°C to 350°C

The small hot plate 983 is a lightweight portable calibration system designed for surface mounted sensors. The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.

• Low cost portable hot plate
• Stable to ±0.1°C
• PC interface and software

MICROK

3-channel expandable precision thermometer for PRTs, thermocouples and thermistors – Primary laboratory

The MicroK family of precision thermometers use a completely new measurement technique to achieve accuracies better than 0.1 parts per million (ppm) – equivalent to 0.0001°C – when used with a standard platinum resistance thermometer (SPRT).

MILLIK

Expandable 3-channel precision thermometer for PRTs, thermocouples, thermistors and 4-20 mA transmitters, -270°C to 1820°C

The very high accuracy 3-channel thermometer MilliK is capable of performances of 0.003°C with SPRTs and PRTs and high accuracy measurements with thermistors, thermocouples and even 4-20 mA process inputs. The number of channels can be expanded to 33 inputs with the MillisKanner.

PHP 602

High accurate dual input reference thermometer for RTDs

PHP 602 is a high accurate dual input reference thermometer for resistive probes.

PHP 601

High accurate dual input reference thermometer for RTDs and thermocouples

PHP 601 is a high accurate dual input reference thermometer for resistive probes and thermocouples.

TTI 10

Portable 2-channel thermometer for resistive probes and thermocouples, -200°C to 850°C

The TTI 10 is a high accuracy handheld temperature indicator with two platinum resistance thermometer inputs. The high precision makes the instrument particularly suitable as a portable reference thermometer to use alongside temperature calibrators such as industrial baths and dry blocks and Fast-Cal models. It is also suited for high accuracy measurements in industrial and scientific applications.

PN 6515

Handheld waterproof thermometer for food industry

Robust, easy-to-use and compact, PN 6515 waterproof thermometer is dedicated to temperature control of perishable food and can be used within expertise campaigns in food industry.

SATURN CYCLOP 878

High temperature primary spherical Blackbody source, 100°C to 1300°C

The Saturn Cyclop R 878 is a spherical Blackbody source. It consists of an inner black sphere that sits inside a spherical furnace and is suitable for use as a radiation source for infrared thermometers. The furnace can be adapted for thermocouple calibration.

QUICK-CAL 550-02

Compact medium temperature Blackbody source, 30°C to 350°C

The Quick-Cal 550-02 is a low cost fast blackbody source offering a cost effective solution for the calibration and testing of infrared thermometers from 30°C to 350°C.

PEGASUS R 970

High temperature primary Blackbody source, 150°C à 1200°C

The Pegasus R 970 is a compact furnace for calibration non-contact infrared thermometers from 150°C to 1200°C.

MEDUSA R 999

High temperature primary Blackbody source, 150°C à 1200°C

The Medusa R 999 Blackbody calibration source allows for calibration of non-contact infrared thermometers from 30°C to 550°C. It is suitable for use as a radiation source for infrared thermometers. For the smallest uncertainties, the Medusa R 999 may be used with ITS-90 Fixed Point cells of Gallium, Indium, Tin and Zinc.

HYPERION R 982

Low temperature primary Blackbody source, -10°C to 80°C

The Hyperion R 982 portable Blackbody calibration source allows for calibration of non-contact infrared thermometers from -10°C to 80°C. It is suitable for use as a primary radiation source for infrared thermometers.

GEMINI R 976

Medium temperature primary Blackbody source, 30°C to 550°C

The Gemini R 976 portable Blackbody calibration source allows for calibration of non-contact infrared thermometers from 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers.

988

Blackbody source for thermal and infrared cameras, 20°C to 45°C

The 988 is a low cost Blackbody source for the calibration of thermal imagers and infrared thermometers from 20°C to 45°C with a resolution of 0.01°C.

975

Medium temperature lost cost fast Greybody source, 50°C to 350°C

The 975 is a low cost fast Greybody source offering a cost effective solution for the calibration and testing of infrared thermometers from 50°C to 350°C. It gives fast accurate results with a larger sensing area.

VENUS

Industrical dry block calibrator, liquid bath, Blackbody source & Fixed Point system, -35°C (Tamb of 20°C) to 140°C

Venus calibrates temperature probes from -35°C (Tamb of 20°C) to 140°C with unrivalled flexibility.
As a traditional industrial dry block calibrator, several thermometers can be quickly calibrated. Accessories are available to convert it to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers and even to use as an ITS-90 fixed point system with calibration uncertainties as small as 0.0005°C.

QUICK-CAL 560

Cost-effective compact and fast dry block, -12°C (Tamb 20°C) to 140°C – Single probe calibration

The low temperature Quick-Cal 560 covers the temperature range of -12°C to 140°C (in ambient of 20°C). Quick-Cal 560 tester is idealy suited to the less exacting applications where our larger, better specified baths are unnecessary, which makes it perfect for the medical, sterilization and food industries.

QUICK-CAL 550

Cost-effective compact and fast dry block, 30°C (Tamb 20°C) to 350°C

The low temperature Quick-Cal 550 covers the temperature range of 30°C to 350°C (in ambient of 20°C). Quick-Cal 550 tester is idealy suited to the less exacting applications where our larger, better specified baths are unnecessary, which makes it perfect for the medical, sterilization and food industries.

PEGASUS 1200

Large volume portable calibration dry block, 150°C to 1200°C

Pegasus 1200 is a large volume portable calibration dry block for temperature thermometers from 150°C to 1200°C. Combined with accessories, it can also be converted into a Blackbody Source for infrared thermometers.

• Large calibration volume: 33.5 x 130 mm depth
• High operating range: up to 1200°C
• Fast heating with optimized thermal profile
• Good temperature uniformity

OCEANUS 6

Dry block, liquid bath, blackbody source & Fixed Point system, -25°C (Tamb of 20°C) to 140°C

Oceanus 6 calibrates temperature probes from -25°C (in ambient of 20°C) to 140°C, with a substantially large calibration volume, 52 mm diameter by 300 mm deep. It can be used as a dry block, a liquid bath, as a blackbody source and as an ITS-90 fixed point system with calibration uncertainties as small as 0.001°C.

JUPITER 650

Large volume portable dry block calibrator, 35°C to 650°C

Jupiter 650 is a large volume portable dry block calibrator for temperature thermometers from 35°C to 650°C. It offers offers industry-leading performance in an easy to use portable package, ideal for the calibration of high temperature thermocouples. For enhanced flexibility, surface sensor and infrared thermometer accessories can be added.

HYPERION

Stirred liquid bath, dry block, Blackbody source & Fixed Point system, -25°C (Tamb of 20°C) to 140°C

Hyperion is a calibration liquid bath for temperature thermometers from -25°C (in ambient of 20°C) to 140°C. It has a large calibration volume, 65 mm x 160 mm deep, which makes it ideal to use as a portable liquid bath. The stirred liquid bath is suitable for temperature sensors of all types, sizes and shapes.

CALYS 1500

Transportable documenting multifunction calibrator with high accuracy 0.005%

CALYS 1500 is the ideal solution to simultaneously simulate and measure with a high accuracy of 0.005%: voltage, current, resistance, temperature (thermocouple or RTD),frequency and pulse.

Instrument:

CALYS1500           Transportable benchtop multifunction calibrator with high accuracy 0.005%

Delivered in standard with:

• Battery
• RS 232interface
• Vinyl soft carrying case
• Instruction manual
• Factory test report

Accessories:

BB880038              Vinyl soft carrying case

Certification:

QMA11EN              COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                       264 x 96 x 172 mm

Weight (net)           4 kg

Weight (gross)        5.5 kg

CALYS 1000

Transportable documenting multifunction calibrator with high accuracy 0.02%

CALYS 1000 is the ideal solution to simultaneously simulate and measure with a high accuracy of 0.02%: voltage, current, resistance, temperature (thermocouple or RTD),frequency and pulse.

Instrument:

CALYS1000           Transportable benchtop multifunction calibrator with accuracy 0.02%

Delivered in standard with:

• Battery
• RS 232 interface
• Vinyl soft carrying case
• Instruction manual
• Factory test report

Accessories:

BB880038              Vinyl soft carrying case

Certification:

QMA11EN              COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                       264 x 96 x 172 mm

Weight (net)           4 kg

Weight (gross)        5.5 kg

CALYS 1200

Transportable documenting multifunction calibrator with high accuracy 0.01%

CALYS 1200 is the ideal solution to simultaneously simulate and measure with a high accuracy of 0.01%: voltage, current, resistance, temperature (thermocouple or RTD),frequency and pulse.

Instrument:

CALYS1200           Transportable benchtop multifunction calibrator with high accuracy 0.01%

Delivered in standard with:

• Battery
• RS 232 interface
• Vinyl soft carrying case
• Instruction manual
• Factory test report

Accessories:

BB880038              Vinyl soft carrying case

Certification:

QMA11EN              COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                       264 x 96 x 172 mm

Weight (net)           4 kg

Weight (gross)        5.5 kg

CALYS 100

Field precision documenting multifunction calibrator

CALYS 100 is a precision documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field and lab measurements, it can simultaneously measure and generate over two isolated channels various signals of temperature, resistance, process, pressure and frequency in one single instrument.

Instrument:

CALYS100             On-site documenting multifunction calibrator

Delivered in standard with:

• User manual
• Battery charger
• Set of 6 testing leads
• Carrying strap
• Factory test report

Accessories:

ACL433              External digital pressure sensor for CALYS 75 / 100 / 150 (Absolute or relative pressure)

Different ranges available from 0 to 1,000 bar

Range from -1 -> 1; 3; 10; 30 (Absolute or relative pressure)

Range from -1 -> 100; 300; 1,000 (Absolute pressure only))

Standard accuracy: 0.05% FS

AN6050              Transport case for CALYS series

ACL9311            Set of 6 measuring cables with removable crocodile clips

ER 49504-000    USB cable

Software:

DATACAL           Calibration software for CALYS 75 / 100 / 150

Supplied with USB cable

Certification:

QMA11EN          COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                    210 x 110 x 50 mm

Weight                900 g

PJ 6301

High precision multifunction benchtop calibrator with documenting capabilities

PJ 6301 multifunction benchtop calibrator is a high precision instrument which can simultaneously measure and simulate of physical and electrical values: DC voltage and current, resistance and temperature from thermocouples and RTDs.

Instrument:

PJ 6301-1              High accurate benchtop multifunction calibrator

Delivered in standard with:

• Carrying case
• Factory test report
• RS 232 interface

PJ 6301-2              High accurate benchtop multifunction calibrator

Delivered in standard with:

• Carrying case
• Factory test report
• RS 232 interface
• Battery + charger

PJ6301-3               High accurate benchtop multifunction calibrator

Delivered in standard with:

• Carrying case
• Factory test report
• RS 232 and IEEE 488 interface

PJ6301-4               High accurate benchtop multifunction calibrator

Delivered in standard with:

• Carrying case
• Factory test report
• RS 232 and IEEE 488 interface
• Battery + charger

Accessories:

AN6901                 Soft case for benchtop instruments

AN5836                 IEEE 488 cable

Length: 2 m

AN5875                 RS232 9p F cable

AN5883                 Bracket mounting for panel installation (T2 box type)

AN5884                 Rack mounting kit for rack installation (T2 box type)

LCL301-OFA          PC software in English

Available for free download from our web site

Certification:

QMA11EN              COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                       255 x 88 x 310 mm

Weight (gross)        2 to 3 kg according to the configuration chosen

CALYS 1500

Advanced laboratory electrical calibrator / Dual input thermometer

CALYS 1500, most advanced and accurate laboratory electrical calibrator of the range, does not only work as a simulator (IN / OUT) but also as a dual channel thermometer (IN / IN) to perform comparison calibration. It calibrates HART transmitters (HART communicator) and thermistors.

Instrument:

CALYS 1500            Benchtop precision documenting multifunction calibrator

Delivered in standard with:

• Quick start manual
• Battery charger
• Set of 6 testing leads
• Factory test report

Accessories:

ACL433                External digital pressure sensor, range to be specified at the order:

Absolute or relative pressure: Range from -1 -> 1; 3; 10; 30 bar

Absolute pressure: Range from -1 -> 100; 300; 1000 bar

ACL9311               Set of 6 measuring cables with removable crocodile clips

ER 49504-000        USB cable

ACL500                 Hart modem for CALYS 150

ACL600                 Cable to drive temperature dry blocks and baths for CALYS 150

Please ask before for compliance with your bath / dry-block

Logiciel :

Software:

DATACAL              Calibration software for CALYS 1000 / 1200 / 1500

Supplied with USB cable

Certification:

QMA11EN             COFRAC certificate of calibration

With all relevant data points where the device has been tested

AMS 2750             Compliance certificate to NADCAP AMS 2750 standard

Packing information:

Size                      340 x 320 x 160 mm

Weight without packing  4,6 Kg

CALYS 1200

Precision documented multifunction calibrator

CALYS 1200 is a field documenting multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries.

Suitable for all field and lab measurements, it can simultaneously measure, generate and record over two isolated channels various signals of temperature, pressure, resistance, process and frequency in one single instrument.

CALYS 1000

Table documented multifunction calibrator

CALYS 1000 is a documenting laboratory multifunction calibrator within CALYS range. It is the perfect tool for advanced process maintenance and use on test bench in all industries.

Suitable for all field and lab measurements, it can simultaneously measure, generate and record over two isolated channels various signals of temperature, pressure, resistance, process and frequency in one single instrument.

Instrument:

CALYS1000             Table documenting multifunction calibrator

Delivered in standard with:

• Quick start manual
• Battery charger
• Set of 6 testing leads
• Factory test report

Accessories:

ACL433              External digital pressure sensor, range to be specified at the order:

Absolute or relative pressure: Range from -1 -> 1; 3; 10; 30 bar

Absolute pressure: Range from -1 -> 100; 300; 1000 bar

ACL9311            Set of 6 measuring cables with removable crocodile clips

ER 49504-000    USB cable

Software:

DATACAL           Calibration software for CALYS 1000 / 1200 / 1500

Supplied with USB cable

Certification:

QMA11EN          COFRAC certificate of calibration

With all relevant data points where the device has been tested

Packing information:

Size                         340 x 245 x 130 mm

Weight                     4 kg

Standard delivery    6 weeks

OM 16

Onsite 10 A micro-ohmmeter for inductive and non-inductive resistance

Designed for field use, OM 16 onsite micro-ohmmeter performs 4-wire measurements of inductive and non-inductive resistances with continuous, pulse or AC measuring current up to 10 A.

• Accuracy: 0.05%
• Resolution: 0.1 µΩ
• Ranges: Selectable from 5 mΩ up to 2.5 KΩ
• Auto power-off of current
• Continuous measurement current for inductive loads
• Pulse measurement current for non-selfic résistances
• Automatic compensation of thermal E.M.F.
• Temperature compensation
• Metal temperature compensation
  

  Instrument:

  OM16                  On-site micro-ohmmeter

                              Supplied in standard with:
                              – Standard mains supply cable to recharge the battery
                              – Quick start manual

  Clips and probes:

  Please note that 2 clips are needed per instrument.

  AMT005              Long handspike, per unit

                              Needle diameter: 3 mm, length without handle: 83 mm, total length: 215 mm, cable length: 5 m

  AMT006              Large kelvin clip, per unit

                              Opening diameter: 25 mm, cable length: 5 m

  AMT011              Small handspike, per unit

                              Needle diameter: 3 mm, total length: 125 mm, cable length: 5 m

  AMT012              Small kelvin clip, per unit

                              Opening diameter: 12 mm, cable length: 5 m

  AMT013              Triggered handspike, per unit

                              Needle diameter: 3 mm, length without handle 83 mm, total length: 215 mm, cable length: 5 m

  Triggering cable to be connected by RS 232

  AMT008              Extension lead, length: 20 m

  AMT014              External Pt100 temperature sensor

  AMT015              Extension cable for AMT014, length: 2 m

  Other accessories:

  LOG OM             Configuration & exploitation software for OM 16 – Includes a F / F RS 232 cable

  AN5909              RS232 F / F cable (PC connection)

  AN5875              RS232 F / M cable (Printer connection)

  Certification:

  QMA11EN          COFRAC certificate of calibration

  Packing information:

  Size                    270 x 250 x 180 mm

  Weight                4 kg

  ► Các câu hỏi, thắc mắc, thông tin liên quan đến sản phẩm từ khâu mua sắm, lựa chọn, sử dụng, cài đặt hay thay thế, vui lòng liên hệ với INO team để được hỗ trợ và tư vấn kịp thời.
  ► Công ty Giải pháp và Công nghệ Đo lường INO, nhà cung cấp các thiết bị đo lường và tự động hóa công nghiệp

  Web: www.ino.com.vn | Mail: sale@ino.com.vn

  Tel: 028 73000184 | Hotline: 0969 593 763

  Website: http://www.ino.com.vn