Hướng dẫn sử dụng đồng hồ đo chênh áp

4…20 mA, 0…20 mA or 0…5 mA output signal + HART protocol
 Display with backlight
 SIL 2 certificate
 Intrinsic safety certificate (ATEX, IECEx)
 Explosion proof certificate (ATEX, IECEx)
 PED Conformity (97/23/EC)
 Programmable zero range, shift, characteristic and damping ratio with local panel keys
 Static pressure limit up to 420bar
 Accuracy 0,075% (0,05% on request)
 Marine certificate – DNV, BV
 Gold plated diaphragms
 Wetted parts material Hastelloy C276

Intrinsically safe network power supply and isolator ZS-31Ex1

 Ex-rated intrinsically safe
 Full galvanic separation of circuits (IN-OUT, IN-SUPPLY, OUT-SUPPLY)
 Accuracy 0,1%
 Casing can be mounted on a standard rail (TS35, TS32)

INO – Đại Lý Aplisens

Download Datasheet: Tại đây!

Model tương tự (Click vào link để xem tài liệu chi tiết):

• Models available up to 300,000 N·m.
• True torque multiplication guaranteed better than ±4%.
• High ratios allow the use of a small torque wrench, multipliers can be used where access is limited.
• Anti Wind-Up Ratchet available on models of 25:1 ratio and above.
• Electronic torque transducers can be fitted for precise torque monitoring.
• A variety of reaction styles are available for maximum versatility.
• Engineered to Order reaction accessories are also available, see

HandTorque Standard

The ClickTronic has been engineered to combine the proven mechanics of our Professional wrench with an Organic Light-Emitting Diode (OLED) display. The result is in an accurate, durable, comfortable and easy to use torque wrench. The digital display provides the user with a more clear and easy to read scale, significantly helping to reduce setting errors. The new digital display can also easily switch between multiple torque units, meaning most country’s preferred torque units can be accessed.

Part number: 15152
EAN Bar Code: 5060207565172
NATO number: –
Accuracy: +/-3%
Operates between: 10,0 – 50,0 N·m 

ClickTronic Norbar

Article Number (Market Facing Number): 3RW4444-6BC44

Product Description: SIRIUS soft starter Values at 400 V, 40oC Standard: 250, 132 kW Inside-delta: 433A, 250kW 200-460 VAC, 230VAC Screw terminals

Product family: 3RW44 soft Starters

Product Lifecycle (PLM): PM300: Active product

Model tương tự:

Các đặt điểm kỹ thuật của sản phẩm:

Features

• Ranges -14.7 to 6,000 psi
• Up to 10,000 psi available with optional remote sensor
• Accuracy 0.025% full scale all ranges
• Integral combined pressure/vacuum pump
• Dual readout: input and output
• 4-20mA loop test: auto step and ramp
• RS232 interface and fully documenting version
• Remote pressure sensors available

  →

The GE Druck DPI 610 / 615 IS Pressure Calibrator combines practical design with state-of-the-art performance. The DPI 610 / 615 Calibrators are self-contained, battery-powered and contains a pressure generator, fine pressure control, and output measurement capabilities as well as facilities for 4-20mA loop testing and data storage.

In addition, the DPI 610 / 615 Calibrators have a rugged weatherproof design, which is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The DPI 610 / 615 Calibrators feature mA step and ramp outputs and built-in continuity testers which extend the capabilities to include the commissioning and maintenance of control loops.

Featuring highly reliable pneumatic and hydraulic assemblies and self-test routines, the DPI 610 / 615 Calibrators can be relied upon time and time again for field calibration in the most extreme conditions. The key to simple operation is the DPI 610 / 615 Calibrator’s task menu. Specific operating modes such as P-I, switch test, and leak test are configured at the touch of a button by menu selection.

The DPI 615 Pressure Calibrator adds powerful time saving and error eliminating features to the comprehensive functionality of the DPI 610 Pressure Calibrator. These features include field error calculations with PASS/FAIL analysis and two way PC communications for downloading procedures and uploading results.

The DPI 615 calibrator calculates errors and reports the pass/fail status during field tests. Problems and failures can be analyzed graphically for immediate assessment and correction or, at a more convenient time and location, by recalling the information from memory. This simple-to-use feature reduces calibration and maintenance times and eliminates human errors.

When used in conjunction with calibration management software, the DPI 615 Calibrator greatly reduces the financial and resource burden imposed by quality systems such as ISO 9000. As work orders are issued, object lists and procedures are downloaded to the GE DPI 615 pressure calibrator. In the field, these procedures configure the pressure calibrator for the tests. The errors and pass / fail status are reported and recorded in memory (as found or as left results) for later upload to the software. Calibration certificates can then be printed and plant maintenance systems updated. The whole documenting process is completed in a fraction of the time it takes using manual systems and without human error.

Pneumatic and Hydraulic Versions Available

The DPI 610 / 615 Calibrators are available as a pneumatic calibrators with pressure ranges from -22 inHg to 300 psi with an internal pump that generates both pressure and vacuum. The pneumatic calibrator is compatible with most common gases. The hydraulic calibrator generates pressures up to 6000 psi via an internal screw pump and can read up to 10,000 psi from an external source. It is compatible with demineralized water and most hydraulic oils.

The standard instrument package includes carrying case, rechargeable battery pack with charger, calibration certificate, manual, electrical leads, and other required components such as pump, volume adjuster, and vent valve (depending upon calibrator model).

Amplifier embedded in M5 or M6 threaded screw

• Simple installation reduces man-hours.
• Replacing fiber sensors contributes to lower power consumption.
• Can be used in the battery industry thanks to its stainless steel housing.
• Our line includes both straight and side view through- beam types.
• Diffuse reflective type is equipped with sensitivity volume. (Model: UX-R5V, UX-R5VPN)

Applications:

Detection of passing condensers                              Starting switch for game machine

Detection of passage PCB

Download tài liệu: Tại đây!